Brand CLEAR-COM

Photo(s) non contractuelle(s)

Clear-Com RS-701 Boitier ceinture Mono canal filaire partyline

1 year warranty

Product highlights

Visual LED indicators on top of keypad
Tactile buttons for Call and Talk
Recessed rotary controls for Volume with end stops
Concealed, programmable DIP switches for Latch Talk, Talk with Call, LEDs Off, Mic Gain, Mic Type and HP Level Off
Fully compatible with current and previous models of Clear-Com analog partyline systems
Low operating current for more beltpack daisy-chaining
Rugged and strong construction
“Clear-Com Sound” for intelligible audio

€778.80 (tax incl.) €649.00 (tax excl.)

Tax included

Subscribe To When In Stock

You have successfully subscribed to this product

Description

In my box

1 x Clear-Com RS-701

RS-701 Single-Channel Beltpack with XLR-3 Connector

The RS-701 is a single-channel analog beltpack that can carry power and audio through the XLR-3 line connector. Each beltpack combines high headroom, low-noise audio and shaped frequency contour (the “Clear-Com Sound”) to deliver clear audio.

Visual LED indicators on top of keypad
Tactile buttons for Call and Talk
Recessed rotary controls for Volume with end stops
Concealed, programmable DIP switches for Latch Talk, Talk with Call, LEDs Off, Mic Gain, Mic Type and HP Level Off
Fully compatible with current and previous models of Clear-Com analog partyline systems
Low operating current for more beltpack daisy-chaining
Rugged and strong construction
“Clear-Com Sound” for intelligible audio

Technical sheet

Microphone Pre-Amplifier

Mic to Line (without limiter acting)

Frequency Response: 280 – 15kHz ± 3dB

Microphone output to line – Audio Level (-50dBm Electret input): -9dBm

Microphone output to line – Distortion: <0.1%

Microphone output to line – Signal to Noise: >65dB

Headphone Pre-Amplifier

Frequency Response – Line to Headphone: 150 – 20kHz ± 3dB

Headphone input from line – Audio Level (-9dBm Electret input): 3.5dBm

Headphone input from line – Distortion: <0.5%

Headphone input from line – Signal to Noise: >50dB

Earphone to Mic – Crosstalk: >80dB

Sidetone – Adjustment Range (-80db mic input): >45dB

Keypad Indicators

Power: Green LED

Talk: Green LED

Call: Orange LED

Connectors

Intercom Line: (2) 3-pin XLR–M–F

Pin 1: Common

Pin 2: PL Power (+28V DC)

Pin 3: Line (Audio)

Headset: 4-pin XLR–M

Pin 1: Mic – (Mic Common)

Pin 2: Mic +

Pin 3: Spkr-

Pin 4: Spkr+ (and 0.5*VCC DC, supply between Pin 4 and Pin 1)

Power

Input Voltage Range: 12-30V DC

Input Current (Idle): <=12mA

Input Current (Max): <=28mA

Call Voltage

16.5V DC

Minimum Voltage Needed: 3.3V

Environmental

32˚F – 158˚F (0˚C – 70˚C)

Dimensions

3.4 x 4.5 x 1.7in (HxWxD)

(86 x 114 x 43mm)

Weight

10.5oz (0.30kg)