AKG Microphone de surveillance
zoom_out_map
chevron_left chevron_right

AKG Microphone de surveillance

3 years warranty

Product highlights
  • Electret Condenser Capsule
  • Hemispherical Polar Pattern
  • 80 Hz to 20 kHz Frequency Response
  • Balanced Mic-Level Output
  • XLR 3-Pin Male Output Connector
  • Phantom Powered


€261.60 (tax incl.) €218.00 (tax excl.)
Tax included
refresh Sur Commande - Habituellement expédié entre 3 et 21 jours Le produit est en cours de réapprovisionnement et sera bientôt en stock.
Description

AKG Microphone de surveillance

In my box
  • AKG Surveillance Microphone

AKG Surveillance Microphone

The white AKG PZM10 is a hemispherical flush-mount boundary layer microphone designed for security, surveillance, and concealed operation. The inconspicuous low-profile design features a tubular steel housing that mounts in a 25/32" diameter hole, making it ideal for installation in a ceiling panel, wall, or table.

The electret condenser capsule offers a hemispherical polar pattern and a wide frequency response of 80 Hz to 20 kHz. It outputs a balanced mic-level signal to an XLR 3-pin male connector and is powered via 12 to 48 VDC phantom power.

Inconspicuous Design

The inconspicuous design features a miniature, concealed profile for surveillance and hidden operation.

Optimized Frequency Response

The PZM10 features an optimized frequency response, ideal for capturing vocals while minimizing low-frequency ambient noise.

Mic-Level Output

This model features a balanced mic-level output with an XLR 3-pin male output connector. The PZM10 is powered via 12 to 48 VDC phantom power.

Convenient Mounting

The tubular steel housing mounts in a 25/32" diameter hole in a ceiling panel, wall, or table.

Technical sheet
  • Form Factor : Boundary/Surface Mount
  • Capsule : Electret Condenser
  • Polar Pattern : Hemispherical/Half-Omnidirectional
  • Pad : No
  • High-Pass Filter : No
  • Frequency Range : 80 Hz to 20 kHz
  • Maximum SPL : 120 dB SPL (3% THD)
  • Impedance : 240 Ohms (Balanced)
  • Load Impedance : 1000 Ohms (Minimum, Recommended)
  • Sensitivity : 2.5 mV/Pa (Open Circuit Voltage)
  • Sensitivity : -52 dBV/Pa (Open Circuit Voltage)
  • Signal-to-Noise Ratio : 68 dB (at 1 Pa/94 dB SPL)
  • Equivalent Noise Level : 26 dB SPL A-Weighted (Typical)
  • Output Connectors (Analog) : 1 x XLR 3-Pin Male
  • Operating Voltage : 12 to 48 V (Phantom Power)
  • Operating Current Consumption : 400 µA
  • Color : White
  • Construction Material : Steel
  • Dimensions : ø: 1.3 x L: 2.8"
  • Weight : 2.6 oz 

Data sheet
PZM10
9002761024852
Similar product